DTA-ZT-25 1'' Inch Straight Through Electric Dust Collector Valve

DTA-ZT-25 1'' Inch Straight Through Electric Dust Collector Valve

The angle between the inlet and outlet of the straight-through electromagnetic pulse valve is 180°The coil in the Solenoid Valve body is input pulse signal through the wire, and the pulse valve is controlled by the output signal of the pulse injection controller. By the pressure change of the two air Chambers before and after the valve, the flexible deformation of the rubber diaphragm realizes the opening and closing of the pulse valve. The diameter of the rubber diaphragm determines the travel size of the rubber diaphragm and the speed of opening and closing.

How to choose
1. AC220V and DC24V are preferred as far as possible for voltage specifications.
2, in the environment with high relative humidity and rain drops and other occasions, should choose waterproof solenoid valve.
3. The rated current and consumed power shall be selected according to the power supply capacity. It shall be noted that the VA value is higher during ac starting, and indirect guided solenoid valve shall be preferred when the capacity is insufficient.

Main Dimension:

353 Series Pulse Jet Valve For Dust Collector System:

CA/RCA Series Pulse Jet Valve:

DMF Series Pulse Jet Valve:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

1'' Inch Dust Collector Valve

Electric Dust Collector Valve

Straight Through Pulse Jet Valve

DTA-ZT-25 1'' Inch Straight Through Electric Dust Collector Valve Images