DMF-Z-62S 2.5 Inch Pulse Jet Valve For Dust Collector System
DMF Series BFEC Pulse Jet Valve:
1. Right Angle Pulse Jet Valve: DMF-Z-20, DMF-Z-25, DMF-Z-40S, DMF-Z-50S, DMF-Z-62S, DMF-Z-76S, DMF-Z-102S
2. Quick Mount Pulse Jet Valve: DMF-ZM-20, DMF-ZM-25, DMF-ZM-40S, DMF-ZL-B
3. Immersion (Embedded) Pulse Jet Valve: DMF-Y-25, DMF-Y-40S, DMF-Y-50S, DMF-Y-62S, DMF-Y-76S, DMF-YA-76S, DMF-YB-76S, DMF-Y-102S, DMF-Y-102SA, DMF-Y-102SE
4. Flanged Pulse Jet Valve: DMF-ZF-25, DMF-ZF-40S
5. Straight Through Pulse Jet Valve: DMF-T-20, DMF-T-25S, DMF-T-40S, DMF-T-50S, DMF-T-62S
Installation
1. Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Technical Data of SBFEC Type DMF Series Right Angle Pulse Jet Valve:
| | | | | | |
| | |
| DMF-Z-20 | | | | | | |
| DMF-Z-25 | | | | | | |
| DMF-Z-40S | | | | | | |
| DMF-Z-50S | | | | | | |
| DMF-Z-62S | | | | | | |
| DMF-Z-76S | | | | | | |
| DMF-Z-90S | | | | | | |
| DMF-Z-102S | | | | | | |
| DMF-ZL-B | | | | | | |
Main Dimension:
BFEC DMF Series Pulse Jet Valve For Dust Collector System:
| Thread Valve | | | | | | | |
| | | | | | | |
| Quick Mount Valve | | | | |
| | | | |
| Flange Valve | | |
| | |
| Embedded Valve | | | | | | | |
| | | | | | | |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
DMF-Z-62S 2.5 Inch Pulse Jet Valve For Dust Collector System Images
|
